Top 10 Best Oil Filter Wrench In 2021
1.WORKPRO 12″ Adjustable Oil Filter Pliers, Oil Filter Wrench Adjustable Oil Filter Removal Tool, Ideal For Engine Filters, Conduit, & Fittings, W114083A
WORKPRO 12 adjustable oil filter wrench is Accommodates most common size car and small engine filters. It has Jaw capacity: 2-3/4 to 4-1/2-inches.
⦁ High carbon steel for strength and reliability
⦁ Permalock fastener eliminates nut and bolt failure
⦁ Fits filters from 2-3/4 to 4-1/2-inches in diameter
⦁ Soft, nonslip red grips offer extra reach and leverage in tight places
⦁ Accommodates most common size car and small engine filters
This is the best oil filter wrench for quality.
Fits most popular 3.625″ standard filters. Tough, stainless steel band with permanently bonded textured coating for superior gripping power, won’t slip.
⦁ Tough, stainless steel band with permanently bonded textured coating for superior gripping power
⦁ Has a 3.5 to 3.875 (88.9 – 98.4 mm) range
⦁ Fits most popular 3.625 size standard filters
⦁ Package dimension is 6.5 inches width by 10.75 inches height by 1.5 inches depth
This is the best oil filter wrench for easy to turn in tight spots.
3.Universal Adjustable Oil Filter Wrench From 2-1/2 inch to 4.5 inch Oil Filter Wrench Tool Set With 3 Jaw
The oil filter wrench can remove the oil filter from 2-1/2 inch to 4.5 inch, fit 1/2 & 3/8 inch square driver ratchet or 7/8 inch wrench which can remove various models of vehicles.
⦁ Function: This oil filter wrench is designed to help you remover the toughest filters on your vehicle.This wrench has three jaws design and it will make you work much more easier.
⦁ Special Design: This oil filter wrench has new designed with three jaws.It will gives much more catching strength to the filters and make the remove easier.
⦁ Fitment: The oil filter wrench can be adjust to remover the filters from 2-1/2 inch to 4.5 inch filters.Fits 1/2 and 3/8 inch square drive ratchet or 7/8 inch wrench in all kinds of vehicles.
⦁ High Quality: The oil filter wrench is made of 45# carbon steel which has a higher strength than normal materials.It is totally rust and corrosion resistant and waterproof. Gives it a long time performance.
⦁ Warranty:1-Year / 365-Days Unlimited Mileage Warranty. Your Purchase is Backed by our Rock-solid Satisfaction Guarantee.
This is the best oil filter wrench for Special gear design, which can more firmly seize the oil filter.
Fits diameters up to 6 inches, It is seat belt type material.
⦁ Country of Origin: China
⦁ Package length:18.0″
⦁ Package width:18.0″
⦁ Package height:21.0″
This is the best oil filter wrench for it works great on all the filters.
5.Motivx Tools MX2324-US 84mm 14 Flute Precision CNC Machined Aluminum Oil Filter Wrench Compatible with Mercedes Dodge and Jeep 3.0L Diesel Engines
This “2nd Gen” 84.4mm 14 flute oil filter wrench fits many Mercedes, Dodge, & Jeep 3.0L diesel engines that use the cartridge style oil filter system.
⦁ This 84.4mm 14 flute oil filter wrench is compatible with Mercedes, Dodge, and Jeep 3.0L diesel engines equipped with plastic oil filter caps which must be removed to expose the filter element.
⦁ This oil filter wrench is proudly made in the USA. It is precision CNC machined from solid aluminum and includes a manufacturer’s lifetime warranty.
⦁ The main body of the wrench is made from 6061-T6 aluminum and anodized grey while the drive hub is made from 7075-T6 aircraft aluminum for ultimate strength and anodized red for better visibility.
⦁ The wrench can be operated with a 3/8” drive ratchet or extension, or a 24mm socket.
This is the best oil filter wrench for compatibility with Mercedes, Dodge, and Jeep.
6.ARES 56012-64mm Oil Filter Wrench for Toyota, Lexus, and Scion 2.0 to 5.7 Liter Engines – 3/8-Inch Drive – Easily Remove Oil Filters
ARES 56012-64mm oil filter wrenches are constructed of high-quality aluminum. This wrench also features laser-etched sizing for easy identification on the job
⦁ SPECIFICATIONS: This 3/8-inch Drive 64mm Oil Filter Wrench for Toyota, Lexus, and Scion 2.0 To 5.7 Liter Engines is Designed to work with multiple applications, including Avalon, Camry, FJ Cruiser, Highlander, Land Cruiser, RAV4, Sequoia, Sienna, Tacoma, Tundra, Venza, and 4Runner, Scion TC, and a wide variety of Lexus applications using the cartridge style oil filter system
⦁ QUALITY: Our oil filter wrenches are constructed of high-quality aluminum. This wrench also features laser-etched sizing for easy identification on the job.
⦁ DESIGN CONSIDERATIONS: This oil filter cap wrench makes it easy to remove and replace the oil filter during oil changes and features a unique tooth design that grips oil filter cover firmly without sliding, so you know you’ll be able to count on it when you need it.
⦁ RELIABLE | EFFECTIVE | EFFICIENT: Users trust ARES to be quality tools. You are backed by our Performance Assurance Limited Lifetime Warranty. If you have any issues with your ARES Oil Filter Wrench, simply contact customer service for troubleshooting help, parts, replacement, or refund.
⦁ ASPCA BUSINESS AMBASSADOR: We are proud to be part of the ASPCA Business Ambassador Program. If you have a pet, you realize they are more than a pet, they are part of the family. With your support, weâ€re proud to help this great organization.
These is the best oil filter wrenches for design considerations.
7.WORKPRO Oil Filter Wrench/Pliers Set, 2-piece, 9’’ & 12’’, Adjustable Oil Filter Removal Tool, for Engine Filters, Cars, and Trucks
This oil filter wrench works on most common-sized vehicles and small-engine filters, such as motorcycles. It fits PVC, conduit, and fittings.
⦁ WHAT YOU GET- The 2-piece Adjustable Oil Filter Wrench Set includes 9-Inch and 12-Inch adjustable wrench. This is particularly useful if you have several vehicles with filters of various dimensions. The set would be good for basic home use, such as auto motorcycles, truck repairing, install oil filters and removal, and general assembly tasks.
⦁ HIGH-QUALITY MATERIAL- The materials of wrenches determine their durability. Our wrench head is made of High quality forged carbon steel, heat-treated for durability. Drop forged construction and corrosion-resistant black finish prolong the service life.
⦁ 5-POSITION SLIP JOINT DESIGN & ADJUSTABILITY- The 12’’ oil filter plier has a 3-3/4’’maximum opening and a 2-1/2’’minimum opening. The 9” plier can be fit for 1-3/4’’ to 3’’ oil filter. If your filter fits within these diameter dimensions it will work. In addition, 5-position slip joint design for quickly adjusts to size, and Large teeth are set at a right angle to the jaw so they bite in either direction for a sure grip on slippery, oil-covered filters.
⦁ LONG REACH- The long enough handle provides extra reach and leverage in tight places. The bigger ones have longer handles and grips and can help you get to areas in which the oil filter is hard to reach.
⦁ ANTI-SLIP DESIGN- Good quality and the handles definitely save your hand’s strength and supply a great grip. With sure-grip teeth, forged jaws grab the filter firmly and gripping even slippery, oil-covered surfaces. WORKPRO oil filter wrench is able to remove even the tightest of the oil filters and will require you only a little effort to remove it.
This is the best oil filter wrench for High-quality Carbon Steel.
8. Apeixoto Oil Filter Wrench and Oil Drain Tool Compatible with Toyota Lexus 2.0L-5.7L Oil Filter Drain Hose Set and Cap Removal Tool Fits for 64mm Cartridge Housing RAV4 Highlander Camry
The oil filter wrench is constructed with 6061 T5 aluminum. It has much better strength than plastic and other types of material.
⦁ Package: The package comes with an Apeixoto oil filter wrench and oil filter drain tool. These tools can be applied with 2.5L to 5.7L engines. The oil filter wrench cap is fit for a cartridge-style oil filter system.
⦁ Specification: The diameter for the oil filter wrench is 64mm. A 27mm socket and 3/8 inch drive ratchet can be used to unscrew the cap. The oil filter drain tool has a brass connector and 35’’ long silicon drain hose. The brass connector will match the tab on the oil filter wrench and direct the oil into the disposal container.
⦁ Material: The oil filter wrench is constructed with 6061 T5 aluminum. It has much better strength than plastic and other types of material. The black powder around the wrench prevents it from rust and corrosion. The oil filter drain has a brass connector. The o ring on the connector and the spin style nozzle will avoid oil linking during draining.
⦁ Application: These oil filter wrench and oil drain tool set is compatible with most models for Sienna, Tundra, Highlander, Camry, RAV4, Tacoma, Sequoia, Avalon, Corolla, FJ Cruiser and Venza Toyota vehicles.
⦁ Warranty: 30 days free return and 365 days free replacement warranty. If you need any assists or meet any troubles during your usage, email us freely and our customer service will get back to you in 24 hours. If you don’t like the part, just get your refund or a new replacement. All we want to do is to make you satisfy with the Apeixoto oil filter wrench and oil drain tool.
This is the best oil filter wrench compatible with most models for Sienna, Tundra, Highlander, Camry, RAV4, Tacoma, Sequoia, Avalon, Corolla, FJ Cruiser, and Venza Toyota vehicles.
9. HDBUBALUS Crankcase Fill Funnel Primary Oil Fill Drip Free Oil Filter Funnel Set with Oil Filter Wrench Compatible with Harley 4 Pcs Orange
This HDBUBALUS Oil Filter Wrench is Made of Steel, Compatible with 1984-2019 Harley Original spin-on oil filters (except ’15-later XG)
⦁ Multi-Function Funnel Kit Helps to Remove or Refill Oil with Minimal Mess, Effectively with Vehicle Oil Changes and Transfer Liquids, Fluids or Powders
⦁ Orange Oil Funnels Set are Made of ABS Plastic, Reusable, Simple and Smooth, Easily to be Cleaned
⦁ Primary Oil Fill Funnel Compatible with Harley Evolution 1340 1999-2000, Dyna 1999-2017, Softail 1999-2017 (except FLSB),Harley Touring and Trike models 1999-2015 (except FLHTCUL,FLHTKL or Touring 2007-2015 or Trike models with Narrow-Profile Outer Primary Cover P/N 25700385 or 25700438)
⦁ Oil Filter Wrench is Made of Steel, Compatible with 1984-2019 Harley Original spin-on oil filters (except ’15-later XG)
⦁ Package Included: 1 Pcs Crankcase Fill Funnel, 1 Pcs Primary Oil Fill Funnel,1 Pcs Drip-Free Oil Filter Funnel,1 Pcs Oil Filter Cap Wrench
This is the best oil filter wrench for Remove or Refill Oil with Minimal Mess, Effectively with Vehicle Oil Changes, and Transfer Liquids, Fluids, or Powders.
10. ATNHYING 16″ Oil Filter Pliers, Adjustable Oil Filter Wrench, Universal Oil Filter Removal Tool No Slipping for Engine Filters, Conduit, Fittings
ATNHYING has advanced production equipment and technology in order to produce high-quality products.
⦁ Application： The use range is 2-7/8″ to 7″.Auto repair tools, used to remove stubborn and difficult-to-remove oil filters.
⦁ Features: Equipped with a three-speed adjustment function, with a larger opening range. Suitable for most oil filters. Bring you a more flexible and convenient experience.
⦁ Quality: The oil filter wrench adopts forging technology, heavy-duty structure, and unique jaw design, which can firmly grasp the automobile oil filter to achieve the effect of not being easy to slip.
⦁ Secure Clip: The oil filter wrench has machined jaw teeth to ensure a firm grip; The oil filter wrenches with the steel claws make it become easier and faster to disassemble the most difficult oil filter.
⦁ Handle Rubber handle, ergonomic design. Comfortable to hold and non-slip.
This is the best oil filter wrench for common-size cars and small engine filters.
Sometimes the smallest things make it biggest difference. This is surely true about oil filter wrenches as their presence and performance in a vehicle are extremely critical. Don’t be panic, you have come to the right place where we have thoroughly researched and gathered all the relevant information to help you make the right choice. Check out the above products.
What tools are needed to change oil and filter?
In addition to oil, you’ll need an oil filter, an oil-filter removal wrench, a wrench to remove the drain plug, a funnel, a drain pan, and some gloves. You may also need to raise the car to gain access, in which case you’ll need a floor jack and safety stands, or a pair of purpose-made steel ramps.
What size wrench do I need to change my oil?
Place a 3/8-inch (0.9 centimeters) socket in the socket wrench, fit it over the drain plug’s nut, and turn it counterclockwise. The oil drain plug should open easily, draining the used oil from the engine