Best Tubing Cutter

Top 10 Best Tubing Cutter in 2021

1.Klein Tools 88904 Professional Tube Cutter

Klein Tools 88904 Professional Tube Cutter

The Klein Tools Professional Tubing Cutter features an accurate 4-roller tracking system. This keeps the tube from threading and helps eliminate spiraling.
⦁ Accurate 4 roller tracking system – no spiraling
⦁ Professional reaming tool
⦁ Extra cutting wheel included; simply remove screw in the back and open the handle to access
⦁ Replacement cutting wheel available (Cat. No. 88905)
This is the best tubing cutter because it has a large handle is comfortable and is easy to turn.

2.Ridgid – CC247 RIDGID 40617 Model 101 Close Quarters Tubing Cutter, 1/4-inch to 1-1/8-inch Tube Cutter Silver

Ridgid - CC247 RIDGID 40617 Model 101 Close Quarters Tubing Cutter, 1/4-inch to 1-1/8-inch Tube Cutter Silver

An essential tool for working in tight and cramped spaces, the RIDGID 101 Close Quarters Tubing Cutter is a handy tool for any plumber’s toolbox.
⦁ Designed for use in restricted spaces on small diameter hard and soft copper, aluminum, brass and plastic tubing
⦁ Strong, lightweight slide and wheel housing and large knurled feed screw knob ensure easy control of cutting pressure for clean cuts
⦁ Rollers include grooves for close-to-flare cuts
⦁ Tubing cutter has a 1/4-inch to 1-1/8-inch (6 mm to 28 mm) cutting capacity
⦁ Includes spare cutter wheel in knob
This is the best tubbing cutter for hard and soft copper, aluminum, brass and plastic tube cutting.

3. RIDGID 23488 Model PC-1250 Single Stroke Plastic Pipe and Tubing Cutter, 1/8-inch to 1-5/8-inch Pipe Cutter, Red , Small

RIDGID 23488 Model PC-1250 Single Stroke Plastic Pipe and Tubing Cutter, 1/8-inch to 1-5/8-inch Pipe Cutter , Red , Small

This tubing cutter PC-1250 features a reversible blade providing two times blade life
⦁ Cuts plastic (PVC, CPVC, PP, PEX, PE)
⦁ Spring-loaded handles allow for faster positioning. Single stroke, easy cut
⦁ Features a reversible blade that provides two times the blade life; Not suitable for cutting multilayer tubing
⦁ PVC pipe cutter has a 1/8-inch to 1-5/8-inch (3 mm to 42 mm) outer diameter capacity
⦁ RIDGID covers its products with a lifetime warranty against defects in material or workmanship for the life of the tool
This is the best tubing cutter is for multilayer tubing.

4. 3 Pieces PTFE Tube Cutter Pipe Tube Hose Cutter Pipe Cutter Accurate Tubing Cutting Tool for Nylon PVC PU Plastic Tube and Hose Cut up to 3/4 Inch OD Tube (Blue)

3 Pieces PTFE Tube Cutter Pipe Tube Hose Cutter Pipe Cutter Accurate Tubing Cutting Tool for Nylon PVC PU Plastic Tube and Hose Cut up to 3/4 Inch OD Tube (Blue)

This tubing cutter has many features such as it cuts smoothly PU, PE, PVC pipe.
⦁ Package includes: you will receive 3 compact PTFE tube cutter, 3.2 inch/ 8 cm in length, 0.92 inch/ 2.3 cm in width and 1 inch/ 2.5 cm in height; They are small in size, compact in structure and easy to carry, has a cutting capacity of 1/8 inch to 3/4 inch (3 mm to 19 mm)
⦁ Quality material: the fuselage by durable, high impact of polyacetal and 304 stainless steel blade, blade is replaceable, fixed by screw, you can according to their own need to replace the blade; Stable structure, long service life, can work in high temperature and high pressure environment, can be applied for a long time
⦁ Smooth cutting: the hardness of the cutting edge is pointed to ensure smooth cutting, which can improve the installation speed and reduce the risk of leakage caused by uneven cutting; Our cutter is designed to cut tubing efficiently, accurately and cleanly
⦁ Safe and efficient: tube cutter with self-supporting design saves the inconvenience of cutter, it can click and cut quickly by pressing the tail; In addition, because the blade is pointed, self-supporting can safely keep the cutter can be closed when not in use, can not only prolong the life of the blade and protect your safety
⦁ Widely use: suitable for various types of soft pipes: PU, PE, Nylon Tube, PVC, etc.; This pointed tubing cutter is great for getting a clean, square tubing cut
This is the best tubbing cutter for smoothly cutting various hard pipes.

5. Milwaukee 2471-21 12-Volt Copper Tubing Cutter Kit

Milwaukee 2471-21 12-Volt Copper Tubing Cutter Kit

The M12 Cordless Lithium-Ion Copper Tubing Cutter Kit cuts up to 10X faster than conventional cutters and gives you up to 200 cuts on a single charge.
⦁ The product is easy to use
⦁ The product is durable
⦁ The product is manufactured in China
⦁ 12V LITHIUM-ION battery for longer run-time
⦁ Close quarter rotating cutting head cuts pipe in confined spaces
⦁ Automatic adjustment from 3/8” – 1” tubing with Auto locking mechanism and Water resistant metal cutter head
⦁ Ergonomic, compact, and lightweight design for operator comfort and Ultra-efficient drive mechanism delivers over 200 cuts per charge
⦁ Battery Fuel Gauge displays remaining run-time and Built-in LED light illuminates work surface
⦁ 12V LITHIUM-ION battery for longer run-time
⦁ Close quarter rotating cutting head cuts pipe in confined spaces
⦁ Automatic adjustment from 3/8” – 1” tubing with Auto locking mechanism and Water resistant metal cutter head
⦁ Ergonomic, compact, and lightweight design for operator comfort and Ultra-efficient drive mechanism delivers over 200 cuts per charge
⦁ Battery Fuel Gauge displays remaining run-time and Built-in LED light illuminates work surface.
This is the best tubbing cutter because it has a built-in LED light that illuminates the cutting surface.

6.Ridgid RC-2375 Ratchet Action 2″ Pipe and Tubing Cutter , Chrome , Small – 30088

Ridgid RC-2375 Ratchet Action 2" Pipe and Tubing Cutter , Chrome , Small - 30088

Rigid RC-2375  pipe and tubing cutter has, ergonomic grips on bottom handle are spaced at 1⁄2″ increments to act as a quick pipe measuring scale.
⦁ Designed to cut plastic (PVC, CPVC, PP, PEX, PE, rubber hose) and multilayer tubing
⦁ Features an easily replaceable X-CEL quick change blade
⦁ “Burr-less” cutting operation delivers a square cut with less effort
⦁ Sturdy aluminum construction suitable for heavy-duty use
⦁ Tubing cutter has a 1/8-inch to 2-3/8-inch (3 mm to 63 mm) outer diameter capacity.
This is the best tubbing cutter for a square cut.

7.iCrimp Tubing Cutter, 3/16-inch to 1-1/4-inch Tube Cutter, for Copper,Stainless Steel Tubes with 2 Pack Replacement Blades

iCrimp Tubing Cutter, 3/16-inch to 1-1/4-inch Tube Cutter, for Copper,Stainless Steel Tubes with 2 Pack Replacement Blades

The tubing cutter has a 3/16 in. to 1-1/4 in. pipe capacity and cuts copper, brass and aluminum tubing, as well as thin-wall conduit.
⦁ 2 pack of ultra- sharp cutting wheel for this pipe cutter
⦁ Capacity from 3/16-inch to 1-1/4-inch (4-32mm) O.D. Adjustable cutting depth designed for fast and safe cutting
⦁ Made from aluminum alloy and Wear-resistant steel blades ensures a durable and sturdy usage.Ergonomic knob reduce fatigue
⦁ The rollers and the blade utilize ball bearings for smoother action on thin stainless steel, all soft tubes like aluminum, copper, and PVC
⦁ With clean, no burrs and smooth cuts on copper tubes and corrugated stainless steel tubing without deforming the peaks of corrugations.
This is the best tubbing cutter for high-strength construction provides durability.

8. LENOX Tools Tubing Cutter for Tight Spaces, 1/2-inch (14830TS12) , White

LENOX Tools Tubing Cutter for Tight Spaces, 1/2-inch (14830TS12) , White

This LENOX tubing cutter has grooved-cast aluminum cutter bodies only need 1/2 inch of clearance to cut. Color-coded for easy tool recognition and cutting direction. LENOX Tools Tight-Spot Tubing Cutter, 1/2-inch (14830TS12).
⦁ Optimized blade geometry of shock-resistant steel means more cuts and less burrs
⦁ Stainless steel rollers protect the cutter from corrosion and rust
⦁ Cutter features a compact design for tight spots Grooved-cast aluminum cutter bodies only need 1/2 inch of clearance to cut
⦁ Color-coded for easy tool recognition and cutting direction
This is the best tubing cutter for more cuts and fewer burrs.

9.Ridgid 57008 C-Style Close Quarters Copper Tubing Cutter

Ridgid 57008 C-Style Close Quarters Copper Tubing Cutter

This copper tubing cutter is, spring loaded Cutter wheel provides a Constant pressure on pipe. Ridgid tools are backed by the best coverage in the industry.
⦁ Cut 1⁄2″ and 3⁄4″ tubing with one cutter with quick change feature
⦁ Snap-On Feature For A Quick Pipe Connection/Ridgid’S X-Cel Wheel Pin For Quick Wheel Replacement. No Tools Required
⦁ Spring loaded cutter wheel provides a constant pressure on pipe
This is the best tubing cutter for accuracy in cutting tubes.

10.RIDGID 23498 Model RC-1625 Ratcheting Plastic Pipe and Tubing Cutter, 1/8-inch to 1-5/8-inch Pipe Cutter

RIDGID 23498 Model RC-1625 Ratcheting Plastic Pipe and Tubing Cutter, 1/8-inch to 1-5/8-inch Pipe Cutter

Ergonomic grips on bottom handle are spaced at 1⁄2″ increments to act as a quick pipe measuring scale.
⦁ Designed for cutting plastic (PVC, CPVC, PP, PEX, PE, rubber hose) and multilayer tubing
⦁ Features an easily replaceable X-CEL quick change blade
⦁ “Burr-less” cutting operation provides a square cut with less effort
⦁ Ergonomic grips on bottom handle spaced at 1/2-inch increments, acting as a quick pipe measuring scale
⦁ Tubing cutter has a 1/8-inch to 1-5/8-inch (3 mm to 42 mm) outer diameter capacity
This is the best tubing cutter for the quick-change blades.

Conclusion:

A tube cutter is a type of tool used by plumbers to cut tubes. Besides producing a clean cut, the tool is often a faster, cleaner, and more convenient way of cutting pipe than using a hacksaw, although this depends on the metal of the tube.

FAQ:
How does a tubing cutter work?

A tubing cutter works using a sharp cutting wheel to slowly penetrate through the metal and sever it. As the pipe cutter is rotated around the pipe in a 360°circle, the cutting wheel cuts through the pipe. With each rotation, the wheel penetrates through more of the pipe.
What are tubing cutters used for?

A wheeled pipe cutter (also called tubing cutter) looks similar to the letter “C” with a handle or knob extending from the side. Wheeled pipe cutters are used to cut pipes made from copper, brass, plastic and thin-walled electrical metal tubing (EMT).

Leave a Comment

Your email address will not be published. Required fields are marked *